Lab-Friendly Solution for Nutraceutical Mixing
Product Information
Dry powder mixing of nutraceuticals. The product is hygroscopic and tends to absorb moisture very easily.
Customer’s Requirement
Compact size: The customer required to have a compact laboratory mixer that could fit easily in the lab.
Mobility: The mixer was required to be mobile, preferably on wheels, and lightweight so it could be moved as per the requirement.
Reduced batch times: The customer wanted a quick turnaround time for mixing batches with variable speed options.
Dust Free Mixing: Since the product is in powdered form, a dust-free solution was sought to avoid dispersing the product outside of the mixer.
No particle degradation: The product size had to remain the same and the mixture should not further reduce the size of the particle.
Enclosed mixer: Since the powder is hygroscopic, it was essential to have a sealed mixer to avoid contact with moisture as much as possible.
Hygiene: Hygienic product was required without any form of foreign material presence.
Solution
Lindor L10: Lindor’s L10 mixer was provided as a solution due to its low shear capability which will prevent any form of particle degradation. The design is entirely free of any internal agitators. The Lindor "Gentle Touch" mixer was, therefore, optimum for the product.
Batch times: The L10 had the capability of mixing batches at a rate of approximately 3 minutes. A Variable Frequency Drive (VFD) was provided for variable speeds.
Mobile, Compact, and Lightweight: The L10 is compact and lightweight which makes it easy to move around within the laboratory. The mixer was added with some wheels for easy mobility.
Product quality: The L10 is made out of Hygienic SS-316 (Food grade Stainless Steel) material and is also easy to clean with air/water.
Outcome
Quick Installation: The product was provided within the stipulated time required by the customer.
Product quality: No particle degradation was found after installing the L10 mixer.
Quick blends: The quick turnaround time for mixing was achieved.
Small footprint: Due to its compact nature, the L10 occupies less space in the laboratory.
Low Maintenance: The L10 is easy to maintain and operate with minimal fuss.
No Residue: Minimal materials would remain in the self-emptying unit which allowed easy starts for the next batch.
Principal
Lindor is engaged in the development, manufacturing and sales of mixers for dry products. Our Engineering department develops mixers according to customer specifications by using modern CAD systems and calculation methods. To meet the requirements of our customers worldwide we can rely on a modern factory and a spacious test centre where mixing tests are performed. Besides the test centre at our premises, Lindor has testing facilities in the UK, Japan, Malaysia and India.
